Table of Contents
- 1. Bring your server off-line
- 2. Update the Trac Code
- 3. Upgrade the Trac Environment
- 4. Update the Trac Documentation
- 5. Refresh static resources
- 6. Steps specific to a given Trac version
- 7. Restart the Web Server
- Known Issues
- Related topics
Typically, there are seven steps involved in upgrading to a newer version of Trac:
1. Bring your server off-line
It is not a good idea to update a running server: the server processes may have parts of the current packages cached in memory, and updating the code will likely trigger internal errors.
Although a database backup will be implicitly created by default when upgrading the environment, it is always a good idea to perform a full backup of the environment using the hotcopy command before beginning.
2. Update the Trac Code
Get the new version as described in TracInstall, or your operating system specific procedure.
If you already have a 0.12 version of Trac installed via easy_install, it might be easiest to also use easy_install to upgrade your Trac installation:
easy_install --upgrade Trac==1.0
If you do a manual (not operating system-specific) upgrade, you should also stop any running Trac servers before the installation. Doing "hot" upgrades is not advised, especially on Windows (#7265).
You may also want to remove the pre-existing Trac code by deleting the trac directory from the Python lib/site-packages directory, or remove Trac .egg files from former versions. The location of the site-packages directory depends on the operating system and the location in which Python was installed. However, the following locations are typical:
- on Linux: /usr/lib/python2.X/site-packages
- on Windows: C:\Python2.X\lib\site-packages
- on MacOSX: /Library/Python/2.X/site-packages
You may also want to remove the Trac cgi-bin, htdocs, templates and wiki-default directories that are commonly found in a directory called share/trac. The exact location depends on your platform. This cleanup is not mandatory, but makes it easier to troubleshoot issues later on, as your installation is uncluttered by code or templates from a previous release that is not used anymore. As usual, make a backup before actually removing things.
3. Upgrade the Trac Environment
Environment upgrades are not necessary for minor version releases unless otherwise noted.
After restarting, Trac should show the instances which need a manual upgrade via the automated upgrade scripts to ease the pain. These scripts are run via trac-admin:
trac-admin /path/to/projenv upgrade
This command will do nothing if the environment is already up-to-date.
Note that a backup of your database will be performed automatically prior to the upgrade. This feature is relatively new for PostgreSQL or MySQL databases, so if it fails, you will have to backup the database manually. Then, to perform the actual upgrade, run:
trac-admin /path/to/projenv upgrade --no-backup
4. Update the Trac Documentation
By default, every Trac environment includes a copy of the Trac documentation for the installed version. However, to keep the included documentation in sync with the installed version of Trac, use the following trac-admin command to upgrade the documentation:
trac-admin /path/to/projenv wiki upgrade
Note that this procedure will leave your WikiStart page intact.
5. Refresh static resources
If you have set up a web server to give out static resources directly (accessed using the /chrome/ URL) then you will need to refresh them using the same command:
trac-admin /path/to/env deploy /deploy/path
this will extract static resources and CGI scripts (trac.wsgi, etc) from new Trac version and its plugins into /deploy/path.
6. Steps specific to a given Trac version
Upgrading from Trac 0.12 to Trac 1.0
Python 2.4 no longer supported
Upgrade Python to at least 2.5, but not 3.0.
Subversion components not enabled by default for new installations
The Trac components for Subversion support are no longer enabled by default. To enable the svn support, you need to make sure the tracopt.versioncontrol.svn components are enabled, for example by setting the following in the TracIni:
[components] tracopt.versioncontrol.svn.* = enabled
The upgrade procedure should take care of this and change the TracIni appropriately, unless you already had the svn components explicitly disabled.
Attachments migrated to new location
Another step in the automatic upgrade will change the way the attachments are stored. Create a backup of the attachments directory before upgrading. In case the attachments directory contains some files which are not attachments, the last step of the migration to the new layout will fail: the deletion of the now unused attachments directory can't be done if there are still files and folders in it. You may ignore this error, but better to move them elsewhere and remove the attachments directory manually. The attachments themselves are now all located in your environment below the files/attachments directory.
Behavior of [ticket] default_owner changed
Prior to 1.0, the owner field of new tickets always defaulted to [ticket] default_owner when the value was not empty. If the value was empty, the owner field defaulted to to the Component's owner. In 1.0 and later, the default_owner must be set to < default > to make new tickets default to the Component's owner. This change allows the default_owner to be set to an empty value if no default owner is desired.
Upgrading from Trac 0.11 to Trac 0.12
Python 2.3 no longer supported
The minimum supported version of Python is now 2.4.
SQLite v3.x required
SQLite v2.x is no longer supported. If you still use a Trac database of this format, you'll need to convert it to SQLite v3.x first. See PySqlite#UpgradingSQLitefrom2.xto3.x for details.
PySqlite 2 required
Multiple Repository Support
The latest version includes support for multiple repositories. If you plan to add more repositories to your Trac instance, please refer to TracRepositoryAdmin#Migration.
This may be of interest to users with only one repository, since there is now a way to avoid the potentially costly resync check at every request.
Resynchronize the Trac Environment Against the Source Code Repository
Each Trac environment must be resynchronized against the source code repository in order to avoid errors such as "No changeset ??? in the repository" while browsing the source through the Trac interface:
trac-admin /path/to/projenv repository resync '*'
Improved repository synchronization
In addition to supporting multiple repositories, there is now a more efficient method for synchronizing Trac and your repositories.
While you can keep the same synchronization as in 0.11 adding the post-commit hook as outlined in TracRepositoryAdmin#Synchronization and TracRepositoryAdmin#ExplicitSync will allow more efficient synchronization and is more or less required for multiple repositories.
Note that if you were using the trac-post-commit-hook, you're strongly advised to upgrade it to the new hook documented in the above references and here, as the old hook will not work with anything else than the default repository and even for this case, it won't trigger the appropriate notifications.
Authz permission checking
The authz permission checking has been migrated to a fine-grained permission policy. If you use authz permissions (aka [trac] authz_file and authz_module_name), you must add AuthzSourcePolicy in front of your permission policies in [trac] permission_policies. You must also remove BROWSER_VIEW, CHANGESET_VIEW, FILE_VIEW and LOG_VIEW from your global permissions with trac-admin $ENV permission remove or the "Permissions" admin panel.
All timestamps in database tables, except the session table, have been changed from "seconds since epoch" to "microseconds since epoch" values. This change should be transparent to most users, except for custom reports. If any of your reports use date/time columns in calculations (e.g. to pass them to datetime()), you must divide the values retrieved from the database by 1'000'000. Similarly, if a report provides a calculated value to be displayed as a date/time (i.e. with a column named "time", "datetime", "changetime", "date", "created" or "modified"), you must provide a microsecond timestamp, that is, multiply your previous calculation with 1'000'000.
Upgrading from Trac 0.10 to Trac 0.11
Site Templates and Styles
The templating engine has changed in 0.11 to Genshi, please look at TracInterfaceCustomization for more information.
If you are using custom CSS or modified templates in the templates directory of the TracEnvironment, you will need to convert them to the Genshi way of doing things. To continue to use your style sheet, follow the instructions at TracInterfaceCustomization#SiteAppearance.
Trac Macros, Plugins
The Trac macros will need to be adapted, as the old-style wiki-macros are not supported anymore due to the drop of ClearSilver and the HDF. They need to be converted to the new-style macros, see WikiMacros. When they are converted to the new style, they need to be placed into the plugins directory instead and not wiki-macros, which is no longer scanned for macros or plugins.
For FCGI/WSGI/CGI users
For those who run Trac under the CGI environment, run this command in order to obtain the trac.*gi file:
trac-admin /path/to/env deploy /deploy/directory/path
This will create a deploy directory with the following two subdirectories: cgi-bin and htdocs. Then update your Apache configuration file httpd.conf with this new trac.cgi location and htdocs location.
Web Admin plugin integrated
If you had the WebAdmin plugin installed, you can uninstall it as it is part of the Trac code base since 0.11.
New Default Configurable Workflow
When you run trac-admin <env> upgrade, your trac.ini will be modified to include a [ticket-workflow] section. The workflow configured in this case is the original workflow, so that ticket actions will behave like they did in 0.10.
Graphically, that looks like this:
There are some significant caveats in this, such as accepting a ticket sets it to 'assigned' state, and assigning a ticket sets it to 'new' state. So you will probably want to migrate to "basic" workflow; contrib/workflow/migrate_original_to_basic.py may be helpful. See TracWorkflow for a detailed description of the new basic workflow.
In versions prior to 0.11, the global configuration was by default located in $prefix/share/trac/conf/trac.ini or /etc/trac/trac.ini, depending on the distribution. You may want to specify that file to inherit from when upgrading. Literally, when upgrading you have to add an [inherit] section to your project's trac.ini file. Additionally, you have to move your customized templates and common images from $prefix/share/trac/... to the new location.
7. Restart the Web Server
If you are not running CGI, reload the new Trac code by restarting your web server.
Trac supports customization of its Genshi templates by placing copies of the templates in the <env>/templates folder of your environment or in a common location specified in the [inherit] templates_dir configuration setting. If you choose to do so, be aware that you will need to repeat your changes manually on a copy of the new templates when you upgrade to a new release of Trac (even a minor one), as the templates will likely evolve. So keep a diff around.
The preferred way to perform TracInterfaceCustomization is to write a custom plugin doing an appropriate ITemplateStreamFilter transformation, as this is more robust in case of changes: we usually won't modify element ids or change CSS classes, and if we have to do so, this will be documented in the TracDev/ApiChanges pages.
Due to internal caching of zipped packages, whenever the content of the packages change on disk, the in-memory zip index will no longer match and you'll get irrecoverable ZipImportError errors. Better anticipate and bring your server down for maintenance before upgrading. See #7014 for details.
trac-admin will not delete or remove default wiki pages that were present in a previous version but are no longer in the new version.
Trac database upgrade
A known issue in some versions of PySqlite (2.5.2-2.5.4) prevents the trac-admin upgrade script from successfully upgrading the database format. It is advised to use either a newer or older version of the sqlite python bindings to avoid this error. For more details see ticket #9434.
If you use a Trac parent env configuration and one of the plugins in one child does not work, none of the children will work.
Upgrading Python to a newer version will require reinstallation of Python packages: Trac itself of course, but also easy_install, if you've been using that. If you are using Subversion, you'll also need to upgrade the Python bindings for svn.
Windows and Python 2.6
If you've been using CollabNet's Subversion package, you may need to uninstall that in favor of Alagazam, which has the Python bindings readily available, see TracSubversion. That package works without tweaking.
Changing Database Backend
Upgrading from older versions of Trac
For upgrades from versions older than Trac 0.10, refer first to wiki:0.10/TracUpgrade#SpecificVersions.