Changes between Version 3 and Version 4 of TracModPython


Ignore:
Timestamp:
2008-07-22T17:10:25+02:00 (6 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracModPython

    v3 v4  
    44Trac supports [http://www.modpython.org/ mod_python], which speeds up Trac's response times considerably, especially compared to [TracCgi CGI], and permits use of many Apache features not possible with [wiki:TracStandalone tracd]/mod_proxy. 
    55 
     6These instructions are for Apache 2; if you are still using Apache 1.3, you may have some luck with [wiki:TracModPython2.7 TracModPython2.7]. 
     7 
    68== Simple configuration == 
    79 
     
    1214 
    1315 ''Note: The exact path to the module depends on how the HTTPD installation is laid out.'' 
    14  
    15 You can test your mod_python installation by adding the following to your httpd.conf.  You should remove this when you are done testing for security reasons. 
    16 {{{ 
     16On Debian using apt-get 
     17{{{ 
     18apt-get install libapache2-mod-python libapache2-mod-python-doc 
     19}}} 
     20(Still on Debian) after you have installed mod_python, you must enable the modules in apache2 (equivalent of the above Load Module directive): 
     21{{{ 
     22a2enmod mod_python 
     23}}} 
     24On Fedora use, using yum: 
     25{{{ 
     26yum install mod_python 
     27}}} 
     28You can test your mod_python installation by adding the following to your httpd.conf.  You should remove this when you are done testing for security reasons. Note: mod_python.testhandler is only available in mod_python 3.2+. 
     29{{{ 
     30#!xml 
    1731<Location /mpinfo> 
    1832   SetHandler mod_python 
     33   PythonInterpreter main_interpreter 
    1934   PythonHandler mod_python.testhandler 
    2035</Location> 
     
    2338A simple setup of Trac on mod_python looks like this: 
    2439{{{ 
     40#!xml 
    2541<Location /projects/myproject> 
    2642   SetHandler mod_python 
     43   PythonInterpreter main_interpreter 
    2744   PythonHandler trac.web.modpython_frontend  
    2845   PythonOption TracEnv /var/trac/myproject 
     
    3148}}} 
    3249 
    33 The option '''`TracUriRoot`''' may or may not be necessary in your setup. Try your configuration with out it, and if the URLs produced by Trac look wrong or if Trac does not seem to recognize the URLs correctly, add the '''`TracUriRoot`''' option.  You will notice that the `Location` and '''`TracUriRoot`''' have the same path. 
     50The option '''`TracUriRoot`''' may or may not be necessary in your setup. Try your configuration without it; if the URLs produced by Trac look wrong, if Trac does not seem to recognize URLs correctly, or you get an odd "No handler matched request to..." error, add the '''`TracUriRoot`''' option.  You will notice that the `Location` and '''`TracUriRoot`''' have the same path. 
     51 
     52The options available are 
     53{{{ 
     54    # For a single project 
     55    PythonOption TracEnv /var/trac/myproject 
     56    # For multiple projects 
     57    PythonOption TracEnvParentDir /var/trac/myprojects 
     58    # For the index of multiple projects 
     59    PythonOption TracEnvIndexTemplate /srv/www/htdocs/trac/project_list_tepmlate.html 
     60    # A space delimitted list, with a "," between key and value pairs. 
     61    PythonOption TracTemplateVars key1,val1 key2,val2 
     62    # Useful to get the date in the wanted order 
     63    PythonOption TracLocale en_GB.UTF8 
     64    # See description above         
     65    PythonOption TracUriRoot /projects/myproject 
     66}}} 
    3467 
    3568=== Configuring Authentication === 
    3669 
    37 Configuring authentication works just like for [wiki:TracCgi#AddingAuthentication CGI]: 
    38 {{{ 
    39 <Location "/projects/myproject/login"> 
     70Creating password files and configuring authentication works similar to the process for [wiki:TracCgi#AddingAuthentication CGI]: 
     71{{{ 
     72#!xml 
     73<Location /projects/myproject/login> 
    4074  AuthType Basic 
    4175  AuthName "myproject" 
     
    4579}}} 
    4680 
     81Configuration for mod_ldap authentication in Apache is a bit tricky (httpd 2.2.x and OpenLDAP: slapd 2.3.19) 
     82 
     831. You need to load the following modules in Apache httpd.conf 
     84{{{ 
     85LoadModule ldap_module modules/mod_ldap.so 
     86LoadModule authnz_ldap_module modules/mod_authnz_ldap.so 
     87}}} 
     88 
     892. Your httpd.conf also needs to look something like: 
     90 
     91{{{ 
     92#!xml 
     93<Location /trac/> 
     94  SetHandler mod_python 
     95  PythonInterpreter main_interpreter 
     96  PythonHandler trac.web.modpython_frontend 
     97  PythonOption TracEnv /home/trac/ 
     98  PythonOption TracUriRoot /trac/ 
     99  Order deny,allow 
     100  Deny from all 
     101  Allow from 192.168.11.0/24 
     102  AuthType Basic 
     103  AuthName "Trac" 
     104  AuthBasicProvider "ldap" 
     105  AuthLDAPURL "ldap://127.0.0.1/dc=example,dc=co,dc=ke?uid?sub?(objectClass=inetOrgPerson)" 
     106  authzldapauthoritative Off 
     107  require valid-user 
     108</Location> 
     109}}} 
     110 
     111Or the LDAP interface to a Microsoft Active Directory: 
     112 
     113{{{ 
     114#!xml 
     115<Location /trac/> 
     116  SetHandler mod_python 
     117  PythonInterpreter main_interpreter 
     118  PythonHandler trac.web.modpython_frontend 
     119  PythonOption TracEnv /home/trac/ 
     120  PythonOption TracUriRoot /trac/ 
     121  Order deny,allow 
     122  Deny from all 
     123  Allow from 192.168.11.0/24 
     124  AuthType Basic 
     125  AuthName "Trac" 
     126  AuthBasicProvider "ldap" 
     127  AuthLDAPURL "ldap://adserver.company.com:3268/DC=company,DC=com?sAMAccountName?sub?(objectClass=user)" 
     128  AuthLDAPBindDN       ldap-auth-user@company.com 
     129  AuthLDAPBindPassword "the_password" 
     130  authzldapauthoritative Off 
     131  # require valid-user 
     132  require ldap-group CN=Trac Users,CN=Users,DC=company,DC=com 
     133</Location> 
     134}}} 
     135 
     136Note 1: This is the case where the LDAP search will get around the multiple OUs, conecting to Global Catalog Server portion of AD (Notice the port is 3268, not the normal LDAP 389). The GCS is basically a "flattened" tree which allows searching for a user without knowing to which OU they belong. 
     137 
     138Note 2: Active Directory requires an authenticating user/password to access records (AuthLDAPBindDN and AuthLDAPBindPassword). 
     139 
     140Note 3: The directive "require ldap-group ..."  specifies an AD group whose members are allowed access. 
     141 
     142 
     143 
    47144=== Setting the !PythonPath === 
    48145 
    49146If the Trac installation isn't installed in your Python path, you'll have to tell Apache where to find the Trac mod_python handler  using the `PythonPath` directive: 
    50147{{{ 
     148#!xml 
    51149<Location /projects/myproject> 
    52150  ... 
     
    62160The Trac mod_python handler supports a configuration option similar to Subversion's `SvnParentPath`, called `TracEnvParentDir`: 
    63161{{{ 
     162#!xml 
    64163<Location /projects> 
    65164  SetHandler mod_python 
     165  PythonInterpreter main_interpreter 
    66166  PythonHandler trac.web.modpython_frontend  
    67167  PythonOption TracEnvParentDir /var/trac 
     
    74174If you don't want to have the subdirectory listing as your projects home page you can use a 
    75175{{{ 
     176#!xml 
    76177<LocationMatch "/.+/"> 
    77178}}} 
     
    81182You can also use the same authentication realm for all of the projects using a `<LocationMatch>` directive: 
    82183{{{ 
     184#!xml 
    83185<LocationMatch "/projects/[^/]+/login"> 
    84186  AuthType Basic 
     
    95197 
    96198{{{ 
     199#!xml 
    97200<VirtualHost * > 
    98     DocumentRoot /var/trac/myproject 
     201    DocumentRoot /var/www/myproject 
    99202    ServerName trac.mycompany.com 
    100203    <Location /> 
    101204        SetHandler mod_python 
     205        PythonInterpreter main_interpreter 
    102206        PythonHandler trac.web.modpython_frontend 
    103207        PythonOption TracEnv /var/trac/myproject 
     
    113217}}} 
    114218 
     219if you have issues with login try using `<LocationMatch>` instead of `<Location>` 
     220 
    115221For a virtual host that supports multiple projects replace "`TracEnv`" /var/trac/myproject with "`TracEnvParentDir`" /var/trac/ 
    116222 
     223Note: !DocumentRoot should not point to your Trac project env. As Asmodai wrote on #trac: "suppose there's a webserer bug that allows disclosure of !DocumentRoot they could then leech the entire Trac environment". 
     224 
    117225== Troubleshooting == 
    118226 
    119227In general, if you get server error pages, you can either check the Apache error log, or enable the `PythonDebug` option: 
    120228{{{ 
     229#!xml 
    121230<Location /projects/myproject> 
    122231  ... 
     
    125234}}} 
    126235 
     236For multiple projects, try restarting the server as well. 
     237 
     238=== Expat-related segmentation faults === #expat 
     239 
     240This problem will most certainly hit you on Unix when using Python 2.4. 
     241In Python 2.4, some version of Expat (an XML parser library written in C) is used,  
     242and if Apache is using another version, this results in segmentation faults. 
     243As Trac 0.11 is using Genshi, which will indirectly use Expat, that problem 
     244can now hit you even if everything was working fine before with Trac 0.10. 
     245 
     246See Graham Dumpleton's detailed [http://www.dscpl.com.au/wiki/ModPython/Articles/ExpatCausingApacheCrash explanation and workarounds] for the issue. 
     247 
    127248=== Form submission problems === 
    128249 
     
    144265If you run trac with mod_python < 3.2 on Windows, uploading attachments will '''not''' work. This problem is resolved in mod_python 3.1.4 or later, so please upgrade mod_python to fix this. 
    145266 
     267 
    146268=== OS X issues === 
    147269 
     
    162284Pay attention to the version of the installed mod_python and sqlite packages. Ports have both the new and old ones, but earlier versions of pysqlite and mod_python won't integrate as the former requires threaded support in python, and the latter requires a threadless install. 
    163285 
     286If you compiled and installed apache2, apache wouldn´t support threads (cause it doesn´t work very well on FreeBSD). You could force thread support when running ./configure for apache, using --enable-threads, but this isn´t recommendable. 
     287The best option [[http://modpython.org/pipermail/mod_python/2006-September/021983.html seems to be]] adding to /usr/local/apache2/bin/ennvars the line  
     288 
     289{{{ 
     290export LD_PRELOAD=/usr/lib/libc_r.so 
     291}}} 
     292 
    164293=== Subversion issues === 
    165294 
     
    167296 
    168297If this is not the case, it's possible that you're using Subversion libraries that are binary incompatible with the apache ones (an incompatibility of the `apr` libraries is usually the cause). In that case, you also won't be able to use the svn modules for Apache (`mod_dav_svn`). 
     298 
     299You also need a recent version of `mod_python` in order to avoid a runtime error ({{{argument number 2: a 'apr_pool_t *' is expected}}}) due to the default usage of multiple sub-interpreters. 3.2.8 ''should'' work, though it's probably better to use the workaround described in #3371, in order to force the use of the main interpreter: 
     300{{{ 
     301PythonInterpreter main_interpreter 
     302}}} 
     303This is anyway the recommended workaround for other well-known issues seen when using the Python bindings for Subversion within mod_python (#2611, #3455). See in particular Graham Dumpleton's comment in [comment:ticket:3455:9 #3455] explaining the issue. 
     304 
     305=== Page layout issues === 
     306 
     307If the formatting of the Trac pages look weird chances are that the style sheets governing the page layout are not handled properly by the web server. Try adding the following lines to your apache configuration: 
     308{{{ 
     309#!xml 
     310Alias /myproject/css "/usr/share/trac/htdocs/css" 
     311<Location /myproject/css> 
     312    SetHandler None 
     313</Location> 
     314}}} 
     315 
     316Note: For the above configuration to have any effect it must be put after the configuration of your project root location, i.e. {{{<Location /myproject />}}}. 
     317 
     318=== HTTPS issues === 
     319 
     320If you want to run Trac fully under https you might find that it tries to redirect to plain http. In this case just add the following line to your apache configuration: 
     321{{{ 
     322#!xml 
     323<VirtualHost * > 
     324    DocumentRoot /var/www/myproject 
     325    ServerName trac.mycompany.com 
     326    SetEnv HTTPS 1 
     327    .... 
     328</VirtualHost> 
     329}}} 
     330 
     331=== Fedora 7 Issues === 
     332Make sure you install the 'python-sqlite2' package as it seems to be required for TracModPython but not for tracd 
     333 
     334 
     335=== Segmentation fault with php5-mhash or other php5 modules === 
     336You may encounter segfaults (reported on debian etch) if php5-mhash module is installed. Try to remove it to see if this solves the problem. See debian bug report [[http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=411487]] 
     337 
     338Some people also have troubles when using php5 compiled with its own 3rd party libraries instead of system libraries. Check here [[http://www.djangoproject.com/documentation/modpython/#if-you-get-a-segmentation-fault]] 
    169339 
    170340----