Ignore:
Timestamp:
2012-08-01T11:11:21+02:00 (3 years ago)
Author:
Xuefer
Message:

htdocs: fixed po2php. add translation for diagnosis

File:
1 edited

Legend:

Unmodified
Added
Removed
  • trunk/htdocs/diagnosis/lang/zh-simplified.php

    r1102 r1103  
    22// auto generated, do not modify
    33$strings += array(
     4        "Diagnosis Result"
     5        => "诊断结果",
     6        "Item"
     7        => "项目",
     8        "Level"
     9        => "级别",
     10        "Result"
     11        => "结果",
     12        "Explanation/Suggestion"
     13        => "解释/建议",
     14        "XCache extension"
     15        => "XCache extension",
     16        "Add extension=xcache.so (or xcache.dll) in %s"
     17        => "在 %s 增加 extension=xcache.so (或 xcache.dll)",
     18        "Please put a php.ini in %s and add extension=xcache.so (or xcache.dll) in it"
     19        => "请在 %s 里放个 php.ini 并且在文件内写入 extension=xcache.so (或 xcache.dll)",
     20        "Cannot detect php.ini location"
     21        => "无法检测 php.ini 位置",
     22        "(See above)"
     23        => "(参见上面)",
     24        "Not loaded"
     25        => "未载入",
     26        "error"
     27        => "错误",
     28        "Loaded"
     29        => "已载入",
     30        "info"
     31        => "信息",
     32        "Enabling PHP Cacher"
     33        => "启用 PHP 缓存器",
     34        "skipped"
     35        => "跳过",
     36        "Not enabled"
     37        => "尚未启用",
     38        "Your PHP pages is not accelerated by XCache. Set xcache.size to non-zero, set xcache.cacher = On"
     39        => "XCache 并未对您的 PHP 网页起到加速作用. 设置 xcache.size 为非 0, 设置 xcache.cacher = On",
     40        "No php script cached"
     41        => "未缓存任何 PHP 脚本",
     42        "Your PHP pages is not accelerated by XCache. Set xcache.cacher = On"
     43        => "XCache 并未对您的 PHP 网页起到加速作用. 设置 xcache.cacher = On",
     44        "Enabled"
     45        => "已启用",
     46        "PHP Compile Time Error"
     47        => "PHP 编译时错误",
     48        "warning"
     49        => "警告",
     50        "Error happened when compiling at least one of your PHP code"
     51        => "至少在编译其中一个您的 PHP 代码时发生编译错误",
     52        "This usually means there is syntax error in your PHP code. Enable PHP error_log to see what parser error is it, fix your code"
     53        => "这通常意味着您的 PHP 代码有语法错误. 请启用 error_log 调查具体错误原因并修复您的代码",
     54        "No error happened"
     55        => "未发生过错误",
     56        "Busy Compiling"
     57        => "忙着编译",
     58        "Cache marked as busy for compiling"
     59        => "编译中, 缓存标记为忙",
     60        "It's ok if this status don't stay for long. Otherwise, it could be a sign of PHP crash/coredump, report to XCache devs"
     61        => "这个状态如果持续不就则无影响. 否则可能标志着 PHP 曾经发生异常退出, 如果是的话请报告给 XCache 开发组",
     62        "Idle"
     63        => "空闲",
     64        "Enabling VAR Cacher"
     65        => "启用 VAR 缓存器",
     66        "PHP code that use XCache caching backend have to use other caching backend instead. Set xcache.var_size to non-zero"
     67        => "使用 XCache 作为数据缓存器的 PHP 代码将不得不采用其他缓存器代替. 设置 xcache.var_size 为非 0",
     68        "Using VAR Cacher"
     69        => "使用 VAR 缓存器",
     70        "No variable data cached"
     71        => "未缓存任何变量数据",
     72        "Var Cacher won't work simply by enabling it. PHP code must call XCache APIs like xcache_set() to use it as cache backend. 3rd party web apps may come with XCache support, config it to use XCache as caching backend"
     73        => "只启用变量数据缓存器并无法将其利用起来. 必须通过 PHP 代码去调用 XCache API 接口(如 xcache_set() 函数) 将 XCache 作为缓存器. 第三方网页软件可能带有 XCache 支持, 留意其中的设置启用 XCache 作为缓存器",
     74        "Cache in use"
     75        => "缓存使用中",
     76        "Cache Size"
     77        => "缓存大小",
     78        "Out of memory happened when trying to write to cache"
     79        => "存入缓存时发生内存不足",
     80        "Increase xcache.size and/or xcache.var_size"
     81        => "加大 xcache.size 或 xcache.var_size",
     82        "Enough"
     83        => "充足",
     84        "Hash Slots"
     85        => "哈希槽",
     86        "Slots value too big"
     87        => "哈希槽设定太大",
     88        "A very small value is set to %s value and leave %s value is too big.\nDecrease %s if small cache is really what you want"
     89        => "设置给 %s 的值很小, 却采用过大的 %s. 如果您的确想要配置占用很少内存的缓存器, 可减少 %s",
     90        "Slots value too small"
     91        => "哈希槽设定太小",
     92        "So many item are cached. Increase %s to a more proper value"
     93        => "相当多的项目缓存了. 请适量加大 %s",
     94        "Looks good"
     95        => "看起来还行",
     96        "Cache Status"
     97        => "缓存状态",
     98        "At least one of the caches is disabled. "
     99        => "至少一个缓存器是禁止状态",
     100        "Enable the cache."
     101        => "启用已禁止的缓存器.",
     102        "It was disabled by PHP crash/coredump handler or you disabled it manually."
     103        => "可能是在 PHP 异常退出时自动标记为禁止了, 或者您手工禁止了",
     104        "You disabled it manually."
     105        => "您手工禁止了",
     106        "If it was caused by PHP crash/coredump, report to XCache devs"
     107        => "如果是由于 PHP 异常退出造成, 请报告给 XCache 开发组",
     108        "Coredump Directory"
     109        => "Coredump 目录",
     110        "Enable coredump to save debugging information in case when PHP crash. It can also be enabled in other module like php-fpm beside XCache"
     111        => "启用 coredump 设置. 这样万一发生 PHP 异常退出时可保存调试信息. 这个功能也可以在其他地方启用, 如 php-fpm",
     112        "Core files found:\n"
     113        => "发现 core 文件:\n",
     114        "Disable XCache PHP Cacher (set xcache.size=0), remove the core file(s), then restart PHP. If core file appears again, report call stack backtrace in the core to XCache devs"
     115        => "禁止 XCache 缓存器 (设置 xcache.size=0), 删除 Core 文件, 再重启 PHP. 如果不用 XCache 时不出现 Core, 请从 Core 中取得 call stack back trace 信息报告回 XCache 开发组",
     116        "You can see core files if PHP crash in %s if PHP crash"
     117        => "如果 PHP 异常退出, 您可以在 %s 目录看到 Core 文件",
     118        "Readonly Protection"
     119        => "只读保护",
     120        "Set to enabled but not available"
     121        => "设置为启用, 但目前不可用",
     122        "Use xcache.mmap_path other than /dev/zero"
     123        => "设置 xcache.mmap_path 使用 /dev/zero 以外的值",
     124        "Disabled"
     125        => "已禁止",
     126        "Enable readonly_protection == --performance & ++stability. Disable readonly_protection == ++performance & --stability"
     127        => "启用 readonly_protection == --性能 & ++稳定性. 禁用 readonly_protection == ++性能 & --稳定性",
     128        "XCache modules"
     129        => "XCache 模块",
     130        "Acceptable. Module(s) listed are built into XCache but not for production server.\nLeave it as is if you're feeling good.\nRe-configure XCache with the module(s) disabled if you're strict with server security."
     131        => "可接受. 以上列出的模块已编译入 XCache, 但这些模块并非用于产业服务器.\n如果您觉得没大碍, 就保持现状.\n如果您对稳定性/安全性要求极其严格, 建议重新编译 XCache 不启用这些模块\n",
     132        "XCache test setting"
     133        => "XCache 测试设置",
     134        "xcache.test is for testing only, not for server. set it to off"
     135        => "xcache.test 仅用于开发测试用, 不用于服务器. 将它设置为 off",
     136        "PHP Version"
     137        => "PHP 版本",
     138        "The version of PHP you're using is known to be unstable: "
     139        => "您所使用的 PHP 版本, 是众所周知的不稳定版本: ",
     140        "Upgrade to new version of PHP"
     141        => "升级到更新的 PHP 版本",
     142        "Extension Compatibility"
     143        => "Extension 兼容性",
     144        "Zend Optimizer loaded"
     145        => "Zend Optimizer 载入了",
     146        "Optimizer feature of 'Zend Optimizer' is disabled by XCache due to compatibility reason; the Loader of it is still available, encoded files are still supported"
     147        => "由于兼容性问题, 'Zend Optimizer' 的优化器已被 XCache 禁止; 其加载器依然可用, 可继续使用 Zend 加密的文件",
    4148        );
    5149
Note: See TracChangeset for help on using the changeset viewer.